Get this. You’ve downloaded the DJI Assistant app for ease but it’s causing calibration issues. How frustrating!
Don’t worry. Fixing these issues isn’t that hard.
Let me give you an overview of DJI Assistant calibration problems and solutions.
The main problem arises when you have issues with the app itself. A faulty operating system or quadcopter might also cause calibration problems. So, you can fix these issues by fixing particular problems. For example, reinstalling the DJI Assistant will help in solving the graying out issue.
Just like this, there are also solutions for calibrating screen size. Do you want to know it in detail? Keep reading and you’ll discover a lot of tricks!
Reasons Behind DJI Assistant Calibrations Issues
DJI Assistant is used for calibrating DJI drones and quadcopters. But sometimes the DJI assistant has some calibration issues. However, whether it’s technical or hardware error like throttle problems of quadcopters there are reasons.
Well. I know you’re already suffering. But I think you’ll be happy to know the reasons behind it.
So, here are the reasons why DJI Assistant shows calibration problems:
- You might have issues with installing DJI Assistant.
- There might be problems with the operating system.
- The drone you’re using might have issues.
- Sometimes the DJI Assistant might have bugs that can cause calibration issues.
- Using poor firmware/software might also initiate calibration problems.
Well, you see your DJI Assistant can’t calibrate because of various factors. It’s wise if you could check all of the devices associated immediately.
Now, you might wonder how to solve these problems. Especially, when you’re trying to solve a specific calibration problem.
You don’t have to scratch your head for this. I got you!
Take a look at the different types of DJI Assistant Calibration Problems and Solutions below.
DJI Assistant Calibration Problems and Solutions
Well, if you are wondering you are alone facing calibration issue, then you are wrong. Here’s someone having headache over the DJI Assistant won’t calibrate.
In this segment, I’ll address each of the possible issues with the solution right away.
DJI Assistant 2 Calibration not Grayed Out:
The first problem that we’ll talk about is associated with the “Calibrate now” button. Sometimes you might see that the button becomes grayed out. It keeps reloading but doesn’t actually show results.
Don’t panic if you face anything like this. You can fix this problem by doing a clean install of your DJI Assistant 2. Follow the process below to solve it:
- First, you have to reboot the PC. Make sure you’re keeping the driver signature enforcement off this time. For this, you must click on Option 7.
- Then, run the DJI Assistant 2 in admin mode.
- Next, you’ll have to install the unsigned drivers. Don’t forget to click yes while installing a DOS box.
- After the installation is done, run the assistant in admin mode again. You don’t have to reboot the PC this time.
- Lastly, hit the “calibration button now”. You’ll be good to go.
That’s it! This is how you fix the grayed-out problem.
DJI Assistant 2 Calibration Screen Size:
So, when you’re calibrating DJI Assistant, you might see issues with the screen. What happens is that while calibrating, DJI Assistant can’t detect the screen size.
The solution is quite simple, unlike the DJI Mini 2 error. You have to use a DVI or VGA connection instead of HDMI to your monitor. Connect it to the Calibration Screen. It’ll be alright.
However, you might see people changing the resolution of the screen. Some might turn PC and change security policies. All of these might work but they are the least effective methods.
Now, what if you face calibration issues rebooting the aircraft? Here’s what you’ll do.
DJI Assistant 2 Calibration Rebooting the Aircraft:
Well, this problem is pretty common for Windows 10 operating system users. So, if you’ve DJI Assistant 2 running in Windows 10, you don’t have to worry at all.
Just follow the steps below to solve this issue:
- First, go to the start button.
- Then, go to settings. Update the security. Then, move on to recovery and change it to Advanced Startup.
- Now, you have to restart your PC. After restarting, select “choose and option”. Click on troubleshoot.
- After troubleshooting, go to startup settings and optimize it.
- Then, restart your PC again.
- Finally, disable the Driver Signature Enforcement.
Done! The calibration issue is solved!
You see, it’s not too hard to solve calibration issues. I hope you’ve learned some great insights from this troubleshooting guide.
Frequently Asked Questions (FAQs)
How do I calibrate my Mavic Pro Vision sensor?
Calibrating a Mavic Pro vision sensor is quite an easy process. Let me tell you how to calibrate quickly. To do this, first, you have to go to the DJI Go 4 app. Tap on the Aircraft Status. Next, go to Vision Sensors and click on it. This will start the calibration system.
Do you have to update DJI firmware?
Yes, you have to update DJI firmware. By updating the software, you can enhance the usability of new features. It will allow you to make the best use of your quadcopter’s flight experience. Also, by updating DJI firmware, you can use the added features in the gimbal, RC, and aircraft.
Do I have to calibrate my drone every time?
No, you don’t have to calibrate your drone every time. But by recalibrating you can enhance the user experience. The magnetic pulls and landings make a positive impact in the drone’s sensors. Like this, there are also other factors that help in calibration. So, it’s better to calibrate.