DJI Phantom is equipped with good-quality components. Yet, some factors can cause the motors not to spin.
It is a frustrating situation if the drone’s motors don’t spin properly.
So, how can you fix DJI Phantom motos not spinning?
If your DJI Phantom motors not spinning it can be caused by a battery issue. The battery isn’t discharging proper electricity. Replacing the battery can fix it. Dust or debris can cause the motor to jam. So, cleaning it can solve the issue too. However, you need to replace the motors if they go bad.
Even though it’s a useful bit of information, it’s just the tip of the iceberg. You need to dive down deeper for more knowledge.
So, without waiting any longer let’s jump to the root of it.
4 Reasons Why DJI Phantom Motors Won’t Spin
DJI Phantom isn’t resistant to issues. Motors not spinning is surely one of those. Another common issue is DJI Phantom controllers won’t charge.
The question now is why are DJI brushless motors not spinning?
The reason behind your DJI brushless motors not spinning is a battery issue. Another reason can be improper wiring. Dust and debris can also stop the moto’s spin. Nevertheless, faulty motors can also be the case.
These are the common reasons behind DJI motors won’t spin. Let’s see how each reason complicates the functionality of motors.
Reason 1 of 4: Battery Issue
DJI Phantom is battery-powered. It supplies the necessary power for the motors to fly in the air. However, if any battery issue arises, the drone motors may stop spinning.
The battery can be displaced for any minor collision. Also, the battery may supply less electricity due to overcharging or not getting fully charged. As a result, the drone motors aren’t getting enough power to spin properly.
Reason 2 of 4: Wiring Issue
The wires of DJI Phantom are very delicate. Any minor inconvenience can snap the wires.
This can lead to DJI Phantom 3 motor not spinning. By getting hit by obstacles the internal or external wire can snap. This can lead to other problems too.
Reason 3 of 4: Dust or Debris
As the motors of DJI Phantom are continuously rotated, it collects a lot of dust. Even though you clean your DJI Phantom regularly, the dust can get inside.
If the dust or debris gets inside of the drone’s motors, it’s likely to jam those. As a result, the functionality of your motor gets hindered.
Reason 4 of 4: Faulty Motor
Lastly, your DJI Phantom’s motors aren’t spinning because of faulty motors. The motors can be damaged for many reasons.
Using the drone in harsh weather conditions can heavily damage the motors. Furthermore, any collision can cause the motor to break. Also, using an excessive amount of lubricant oil can badly harm the motors.
So, these are the common reasons why DJI motors aren’t working. But, what should be the solution to each problem?
Well, fear not! In the next section, I will properly troubleshoot each of these problems.
So, let’s move along.

Troubleshooting DJI Phantom Motors Won’t Spin
DJI Phantom is capable of taking some breathtaking photos and videos. Here’s someone who used DJI Phantom 4 to shoot a beautiful scenario.
You can also take such beautiful shots using your DJI Phantom. However, if DJI motors aren’t spinning properly, you won’t be able to fix them. So, how to fix a drone that cannot fly?
In this segment, I will troubleshoot each problem for you. So, let’s see the possible solution for it.
Troubleshoot 1 of 4: Battery Issue
Sometimes, the battery connector gets loosened. You need to check if the connection is strong or not.
To do so, you need to open up the battery compartment. Just press down the battery door and release it.
Now pull the battery out. Check if the power connector is properly secured or not. If it’s not, just attach the power connector tightly.
If this didn’t fix the issue, you need to change the battery. Battery packs are available for the DJI Phantom series.
DJI Phantom 4 Intelligent Flight Battery is compatible with DJI Phantom 4 models. It is a massive 5350 mAh LiPo battery. It has a runtime of an average of 5 hours!
Mackertop Replacement Battery is compatible with DJI Phantom 3. The battery is 4480 mAh LiPo and can fly for an average of 23 minutes.
Upstart Battery is compatible with DJI Phantom 2. This aftermarket battery has an average flight time of 27 minutes.
The battery issue also causes DJI Phantom controllers won’t charge. So, the issue is very common for this DJI series.

Troubleshoot 2 of 4: Wiring Issue
Wiring issues can happen both internally and externally. You can see if any outer wires have been torn out. But, to check internal wires, you need to open up the whole DJI Phantom.
If you see any wires have been torn or damaged, you need to replace them. The process is very simple.
You need to see where the wire is connected. After that, remove the damaged wire.
Now, get a new wire and a hot gun. Attach the wire to one end first and heat it indirectly with a heat gun. Repeat the same process with the other end.
Troubleshoot 3 of 4: Dust or Debris
Through air vents, dust or debris can get inside the drone motors. If you see any dust or debris, clean those. Using a vacuum cleaner or microfiber cloths can remove the dust. However, don’t get the dust on other components of your drone.
Troubleshoot 4 of 4: Faulty Motor
If none of the solutions helped, you need to change the motor. Luckily, the motors cost cheap.
DJI Clockwise Rotation Motor for Phantom 4 Quadcopter is compatible with DJI Phantom 4.
DJI Clockwise Motor for Phantom 3 is a proper fit for DJI Phantom 3.
Taoke Yaw Roll Pitch Motor is a gimbal motor for DJI Phantom. It can be stable in heavy wind.
To replace the motors, you need to disconnect the battery first.
Secondly, using a 12 mm wrench, you need to unscrew the bolts of propellers.
Thirdly, by flipping your drone, open up the case. You need to unscrew the 4 Philips screws for that.
Fourthly, you need to unplug the magnetometer from land gears.
Now, you can open up the top shell. You have to remove every cable connected to the motherboard.
Once you have done that, you need to remove the motor. For that, just unscrew the motor from the shell.
Finally, remove the damaged motor. By repeating the process backward, you can attach the new motors now.
This final solution will resolve the issue. Now, you can fly with your DJI Phantom at ease.
However, if you feel that the drone is unbalanced, you should change all the motors. That way, the motors can work perfectly together.

That is all regarding the troubleshooting of the issue. You should follow a proper DJI drone maintenance guide. That way, problems like this will have less possibility to occur.
Frequently Asked Questions (FAQs)
Can You Fly DJI Phantom Without Internet Connection?
Yes, you can fly DJI Phantom without any internet connection. However, you won’t get the live map on your controller. But, if you cached the map before your flight, it can appear. Nevertheless, instant sharing cannot be done without an internet connection.
Do DJI Phantom Drones Use WiFi?
Yes, DJI Phantom drones use high-frequency WiFi. It allows the drone and controller to stay connected. Whatever your DJI Phantom is recording will be shown on your remote controller using WiFi.
Can You Fly DJI Phantom Without A Phone?
Yes, you can fly DJI Phantom without a phone. Most of the controllers have an in-built display. This allows you to control the drone. However, some of the controllers won’t include a display. In such a case, you need to keep the drone within the visible range.
Conclusion
That is all regarding DJI Phantom motors not spinning. Now, you can troubleshoot the issue by yourself!
Here’s a tip, by using the SkyPixel app you can share sphere photos using a PC. That way the photo will be of high quality.
Have a good day.