force1 drone troubleshooting

Force1 Drone Troubleshooting: Fly Drone Without Errors!

Your drone isn’t listening to you. Every command you press, it seems not to like it, huh?

Sometimes Force1 Drone doesn’t act as you want. And this happens when there’s an internal problem with your drone. But there’s a solution to every problem.

So, here’s how to do Force1 drone troubleshooting.

To troubleshoot your Force1 drone, you must check if there’s a problem with the batteries. Make sure the batteries in the drone and transmitter are installed with the correct polarity. Again, you must ensure secured charging cable connections so that the drone can get fully charged. 

This is just a glimpse of troubleshooting the drone. Keep reading the article below to see learn the step-by-step procedures. 

Quick Troubleshooting Guide

force1 drone
Source: Amazon
ProblemReasonA Quick Troubleshoot
The Drone doesn’t turn on.The preflight operation isn’t in the right sequence.Review the preflight operation and reboot it.
The drone doesn’t charge.Loose charging cable.Connect the charging cable with the USB port properly.
The drone keeps crashing.There are many obstacles in front of the drone.Create enough flight space for the drone.
The drone’s LED lights are flashing but the drone can’t fly.The palm remote battery is not working.Test the buttons on the palm remote and fix it.
The propellers spin but the drone can’t fly.Propellers are damaged or dirty. Reboot the drone by powering it down.

Problem 1: The Drone Isn’t Turning ON

It’s annoying when you’re all prepared for a fun drone flying day and the drone doesn’t work. No matter how prepared you are, the drone isn’t turning ON. 

Reason:

When the drone isn’t powering on, there is a problem in the preflight sequence. The drone won’t act your way if you aren’t serious about the preflight operations.

So, what you have to do is check all the preflight conditions in your Force1 drone. And you have to troubleshoot this Force1 drone just like you can troubleshoot the Striker Spy drone.  

Solution:

Before you start flying the drone, you should ensure the following preflight conditions:

  • First of all, you have to check the area if it meets the local and federal guidelines. Make sure it’s an open area where there’s no obstacle.
  • Charge the drone and transmitter batteries to 100%.
  • Make sure the left stick of the transmitter is kept in the middle position.
  • Then, you have to follow the Calibration instructions. You’ll get to learn how to calibrate in the next section.
  • Keep the transmitter ON before flying. Don’t forget to turn OFF the drone once you’re done with the flight.
  • Always ensure that every connection between your Force 1 drone battery and the motor is secured. 
  • Check whether the propellers are installed properly. Make sure the motors are working too!
  • Keep the drone facing away from you before flying.

Now, let’s get to the real part. Here’s how you’ll conduct the preflight operation or calibrate your drone:

  • First, you have to turn on the transmitter. Then, push the left stick down and release it. It will come back automatically and will be prepared for pairing.
  • Now, power on your drone. Keep it on an even surface. 
  • Finally, push the right stick down and then to the right. After you’ve done that, release the stick. 

You’ll see the drone body light flashing. This means the drone is calibrating. After the lights turn into a solid color, you’ll know the calibration has been successfully completed. 

NOTE: Make sure you don’t move the left stick before the calibration process is completed. Also, you should recalibrate the drone if it crashes and doesn’t perform well. 

Problem 2: The Drone Isn’t Charging

f100 ghost
Source: Force1RC

As you already saw earlier, charging the drone is a prerequisite for flying drones. But what if the drone isn’t charging at all? 

It’s a common problem that drone flyers face. And if your Force1 drone is giving you the same trouble, you should check the connections.

Reason:

The reason your Force 1 drone is not connecting is because of loose cable connections. It’s disrupting the charging process. When the charging cable is loosely connected to the USB port, it can’t pass the current. 

As a result, the drone won’t charge. 

Solution:

The solution to this charging problem is to check the connections. You’ll see a socket in the battery. Make sure you have connected the charging cable to the USB port correctly. And if the Lipo battery is dead, you should charge it. 

One way to identify whether the drone is charging or not is to check the indicator lights. You’ll see a red light when you’ve plugged in the USB. This means the drone is charging. If the light gets off afterward, this means the drone is charged fully. 

Problem 3: The Drone Keeps Crashing

It’s a serious problem if your drone can’t fly properly. And the reason is pretty silly and obvious which you might have overlooked.

Reason:

The reason your drone keeps crashing is obstacles. That’s right. When you’re flying your drone amidst a crowdy space or in between buildings, it’s hard to navigate. That’s why the drone keeps falling down.

Solution:

So, what you have to do is clear all the obstacles when flying your drone. Make sure there’s enough empty space so that the drone doesn’t hit anything. 

By doing so, it’ll be much easier to navigate the drone.

Problem 4: The Drone Flashes LED Lights But Won’t Fly

Here’s another problem you may relate to. You’ve been trying to fly your drone. The LED lights are giving you the signal that it’s ready to take off. But the drone doesn’t fly.

Reason:

The reason the drone isn’t flying is hidden in the palm remote battery. If the battery does not work properly, the drone won’t take off. 

Solution:

To fix this issue, you must check what’s wrong with the palm remote battery. See if it’s working or not. Test the buttons on it. 

You have to establish communication between the remote and the drone. Only then your drone would fly. 

Problem 5: The Drone Propellers Spin But the Drone Can’t Fly

Lastly, I’ve got a problem that’s a bit more serious than the other Force 1 drone parts issues we discussed. You might see the propellers of the drone are spinning. Yet, the drone still isn’t flying.  

Reason:

The reason this type of issue occurs is damaged propellers. Again, if the propellers are dirty and there is debris inside your drone, it won’t fly. 

Yes, many people tend to forget to clean their drones. And that’s a reason why the drone stops working. 

Solution:

So, if you’re in the same situation, you have to clean the drone first. Make sure you reach out to every corner and keep it debris free. 

If the propellers are damaged, replace them with new ones. 

Then, power down the drone and start it again powering the palm remote. It’s like rebooting your drone. 

And that’s how you get your drone flying through the sky again. 

Safety Precautions for Force1 Drones

Now, before you run to fly your favorite Force1 drone, you should know about the safety rules. Force1 drone is designed for users aged 14 or above. So, you must keep this in mind while gifting your kid a Force1 drone.

Here are all the safety precautions that every Force1 Drone user must follow:

Keep the Drone in Dry Environment:

Force1 drones consist of electronic components that aren’t compatible with humid environments. So, you must keep the drone away from water or humidity. Otherwise, the electronic components might get damaged.

Avoid Direct Sunlight and Heat:

Make sure the drone isn’t getting direct sunlight. As the drone is made of metal, plastic, fiber, and electronic components, it will get distorted in excessive heat. So, keep in mind the surrounding temperature so that your drone remains safe.

Keep Away from Rotating Motors:

Rotating parts of the drone would cause serious injury to you if you stand nearby. That’s why always maintain a distance when the drone is about to take off or fly.

Keep an Eye on the Surface:

You must be aware of the places you’re flying the drone. Never place your drone on an uneven surface or a dangerous field. Always remember to remove any obstacle that comes in the way of your drone. So, the best thing you can do is avoid areas that don’t have a ground for drone flying. 

Frequently Asked Questions (FAQs)

How long does it take to charge Force 1 drone?

It takes approximately 50 minutes to charge the Force1 drone. With 50-minutes of full charge, you can fly the drone for 8 minutes. 

How do you start a Force 1 drone?

To start a Force 1 drone, first, you have to insert the drone batteries. Then place the drone on an even surface. As soon as it’s powered on, you’ll see lights flashing. Then, turn on the transmitter. You’ll hear a beep twice. The drone is ready to take off!

How to dispose of damaged Force 1 batteries? 

To dispose of damaged Force 1 batteries, you have to contact the local waste agency. You can also contact the nearest LiPo battery recycling center and let them take care of it. Do not throw the batteries away with household trash. Batteries should be disposed of in a specialized way that doesn’t harm the environment. 

Conclusion

So, this is how you can do a Force1 drone troubleshooting whenever you have any issue with your drone. Make sure to maintain all the safety guidelines before and after flying. Hopefully, you’ll have a wonderful flying experience.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top