You have just bought a new drone and you want to fly it immediately. But when you try to fly it you find that it isn’t functioning. You’re not the only one who has experienced this issue.
If you’re aware of how to fix it, you can simply solve these common issues.
So, how to troubleshoot propel air micro?
Make sure the propellers are correctly aligned and fastened to the drone body. Check that the battery is fully charged. Make sure the remote control is properly aligned with the drone. Ensure there is enough space between the drone and obstacles. Also, no objects are in their flight path
In this article, we’ll outline the most common problems and how to fix them.
A Quick Summary
|The battery is not charging||Faulty battery or damaged charging port||If the charging port is damaged you need to replace it|
|Propel Air micro is not taking off||Battery is not fully charged or propellers are loose||Ensure the battery is properly charged and the propellers are properly aligned|
|Propel Air micro is not responding to remote||The drone is not properly calibrated with the remote||You may need to calibrate the remote. Ensure the remote is completely charged.|
|Propellers are not spinning||Propellers are loose or detached from the drone||You may need to reattach propellers to the drone|
|Propel Air micro is crashing||Propel air micro loses balance||Check whether the battery is fully charged and the propellers are properly aligned|
Problem 1: The Battery Is Not Charging
It is a common problem for every electronic device that runs with batteries. Once I had to troubleshoot my mini Orion drone that has the same problem. I’m going to share the same steps with you here.
Reason: Faulty Battery or Damaged Charging Port
There may be several causes for your drone not taking charge. It can be for the battery or maybe the charging cable is broken. Let’s look at the solutions if this happens.
You’ve tried charging your Propel Air Micro Drone battery, however, the issue remains. What should you do?
- Checking the battery itself should be your first action.
- If the battery is damaged in any way, or if it’s not properly plugged in. It won’t charge correctly.
- Verify that each connector is attached properly and that the battery isn’t damaged.
- If so, you’ll have to change it.
- If everything looks okay but the drone still isn’t charging. The charging port could be having a problem.
- You will then need to find a fresh charger.
Contact Propel customer service for more information.
Problem 2: Propel Air Micro Is Not Taking Off
Reason: The Battery is Not Fully Charged or Propellers Are Loose
When your drone isn’t taking off, there can be a few causes for this. Here are some troubleshooting tips to help you get your drone in the air
- Make sure that your drone is charged and has enough power. The battery icon should be completely green before attempting to fly.
- Make sure that your drone is in “Take Off” mode. Check the joystick to make sure it’s in the correct spot. Also, ensure that your drone is pointed in the direction you desire.
- Check to see if there is proper space for your drone to take off and land. The Propel Air Micro Drone is not designed for indoor use.
- Ensure that there isn’t wind present. The drone cannot take off or fly in windy conditions.
- Make sure that the propellers are securely fastened. If they’re loose, they can’t generate enough power to lift the drone off the ground.
- Verify that the drone has been calibrated correctly. This means that the sensors on the drone need to be aligned with the remote control. If they’re not, the drone will be unable to navigate properly.
This step can make your drone fly. However, if you still find difficulties flying your drone the next step might help you.
Problem 3: Propel Air Micro Is Not Responding To Remote
I want to start off by saying that I’m very impressed with the quality of your product. I have been using the Propel Air Micro for about a week now. I have noticed some problems with it.
Reason: The Drone Is Not Properly Calibrated With The Remote
If your drone is not responding to the remote, a few options are available to you.
- First, make sure that the batteries in the remote are charged and that it’s turned on.
- Suppose that fails. try moving nearer to the drone and pointing the remote directly at it.
- If it’s still not responding, you may need to calibrate the remote.
- To do this, press and hold both joysticks trigger down for about five seconds. Hold until the light on the remote starts flashing.
Problem 4: Propellers Are Not Spinning
When the propellers of a drone aren’t spinning, it’s hard to tell if they’re working correctly. If you hear a constant sound or see only one or two blades spinning, check your propellers.
I’m going to share the same troubleshooting process the way I troubleshoot my skytracker drone.
Reason: Propellers Are Loose Or Detached From The Motor
Several factors could be the root of this problem but don’t worry I am here to help.
- The most common reason for this problem is that the propellers have become loose or detached from the motor.
- If this is the case, all you need to do is reattach them using the screws on the bottom of the drone.
- If they’re still loose after tightening them, you can use some electrical tape to hold them in place.
- There might be anything impeding, which is another possibility the propellers, like a bit of dirt or hair. You might try blowing into the drone in this situation to get rid of the impediment.
- The propellers may need to be taken off and cleaned if this does not work.
Hopefully, one of these fixes will quickly get your propellers moving again.
Problem 5: Propel Air Micro Is Crashing
So, you’re having an issue with my Propel Air Micro. The device is crashing and you’re unable to open the app. You have restarted the phone, but the same problem persists. Let’s see how to fix this problem.
I have tried to re-install the app, but it does not work.
Reason: Propel Air Micro Loses Balance in Flight
You’re flying your Propel Air Micro Drone around. Suddenly it starts to wobble erratically and then crashes to the ground. What could be the problem?
There are a few likely culprits behind your drone’s sudden crashes.
One scenario is that the battery has to be changed since it is drained. Another is that there’s something wrong with the drone’s propellers, causing it to lose balance in flight.
- If you’re experiencing frequent crashes, try checking the battery level. Also, propellers to see if either of those is the issue.
- If nothing of those approaches appears to be effective. Then you might want to take your drone to a Propel technician for a closer look.
Here are a few helpful tips on how to fly your drone and prevent it from crashing:
- First and foremost, always read the instruction manual! Before you begin using your drone to fly, you must be familiar with all of its features.
- Secondly, be sure to practice in a safe and open area. Don’t try to fly your drone near busy streets or tall buildings. Avoid taking the chance of losing it or colliding with something.
- Last but not least, watch your drone constantly. Keep your eyes fixed on it at all times. Especially when it’s near the ground. You’ll want to be able to stop anything from going wrong before the program fails.
Frequently Asked Questions (FAQs)
Why Is My Propel Drone Not Working?
The most frequent causes of inappropriate propeller rotation in drones are impediments. Such as debris, battery problems, faulty transmitter-to-drone connections, and incorrect gyro initialization. Also, problems with the drone’s propellers, motors, and wiring.
How To Sync Propel Drone to The Controller?
Start the drone’s operating app, touch Enter Device, Camera View, then Link Remote Control Settings. The function button should be pressed and held before being let go. After the drone beeps, a green light will appear on the controller and the drone.
How To Calibrate A Drone?
Spin the drone horizontally while maintaining a level position with the ground until the light goes green. After that, turn the drone straight (to the ground). Spinning slowly, waiting for the second light to turn green. A red flashing light will appear if there was a calibration issue.
This is all about the propel air micro drone troubleshooting. I hope this helps you out. Please feel free to leave a comment below if you have any further inquiries about this matter.
Have fun with your drone! See you in the next article.