velcro adhesive not sticking

Velcro Adhesive Not Sticking [Solution And Prevention]

Velcro, is sometimes referred to as hook and loop fasteners generally. It is a simple fix for all of your fastening issues. Two sides of this two-part set may be pushed together to create a seal.

However, sometimes it loses its stickiness. It can be rather an aggravating problem. 

So, why velcro adhesive not sticking? 

Velcro hooks can become jammed with lint and stray hairs since life is frequently untidy. and other common objects that prevent the hooks from attaching to the loops. However, there is a simple solution by removing the hook side of this detritus. Your Velcro may be put back to its original state.

You will also want special instructions to fix this issue in addition to this information.

Let’s go through them:

Reasons why Velcro Adhesive Not Sticking

Velcro is used for attaching different RC car parts. There can be a lot of reasons behind velcro adhesive not sticking. They are given as follows:

  • Catching lint and other debris in the Velcro.
  • Due to too much use of the Velcro strap. 
  • The Velcro could be too old for which the adhesive has worn out.
  • If the Velcrois not attached properly.
  • It can also be that you are not attaching it in the proper way.

These can be the probable reasons for Velcro adhesive not sticking.

velcro adhesive
Source: bn.quora.com

How Do you Fix Velcro Adhesive Not Sticking?

When Velcro becomes soiled with lint and filth, it stops being sticky. Velcro may typically be made to adhere once again by clearing off the lint and dirt. But is not similar like latrax alias issue resolving. However, you will need to buy new Velcro if your existing one is damaged or worn out. Take proactive precautions to keep your Velcro clean to extend its lifespan. The solutions are given:

Solution 1: Using Fingertips to Remove any Stray Lint 

Any bulky objects trapped in the Velcro should be pinched. Pull them out from under your fingernails. Consider how you would remove hair from a hairbrush and follow those same steps. It is not easy as removing the stuck set screw. To remove hair, lint, and other debris from the Velcro.

The hook and loop fastening system, which is used on velcro tabs, consists of two pieces. The hook is the rougher side, and the loop is the softer side. Usually, the component that gathers the trash is the hook. As a result of the Velcro’s grabby and adhesive portion being here.

It’s likely that your Velcro will lose its stickiness over time. Due to the hooks’ deterioration. Cleaning won’t help much in this situation; you might need to replace the Velcro. If you are unable to make it grasp again.

Solution 2: Using Tweezers to Remove any Stray Lint or Debris

If you don’t like the first solution, this is another option using tweezers. But how to use tweezers to remove stray lint?

With one hand, steadily hold the Velcro. With your other hand, remove any debris with a pair of tweezers. which are snagged farther down in the Velcro’s hooks. Avoid using the tweezers to grip and pull on the hooks. You run the risk of breaking them and making your Velcro less sticky.

Velcro
Source: sewingiscool.com

Solution 3: Removing Material With the Use of a Pin or Needle

Let’s head on to the third solution. Slide the pointed end beneath the trash and between the rows of hooks. After that, carefully raise up to remove the object. Proceed in the same direction that the Velcro’s rows of hooks are facing.

Any little, thin, needle-like instrument will work for this technique. Simply make sure it is strong enough to remove junk. Without bending, something may be seriously trapped in the Velcro.

Solution 4: Using a Fine-Toothed Comb to Scrape the Velcro of any Dirt

Here is the 4th solution Keep the Velcro flat and firmly in position. By applying the velcro the right way. To remove tenacious lint, run a plastic, metal, or wooden comb along the rows of hooks. And more debris that you cannot pick up or move.

Make sure the comb’s teeth are not too little. And sensitive so that they may break when you’re removing dirt.

Solution 5: Using a Dry Toothbrush to Brush the Velcro

This is the final solution. Utilize an old toothbrush that you no longer require for oral care. The hook rows should be parallel to one another as you brush the Velcro. To remove any last bits of lint and other debris.

The greatest toothbrush is one with firm bristles. Alternately, you might use a dish brush or a brush for your pet. The stickiness of velcro’s adhesive is not similar to gluing rc tires.

Don’t clean too vigorously or you risk damaging the Velcro’s hooks. Working in parallel with the hooks is crucial for this reason. So that they maintain their shape while you sweep up rubbish.

Here is a guy with a good experience with velcro adhesive.

Preventing the Deterioration of Velcro’s Adhesiveness 

By following some certain rules velcros adhesiveness will last longer. So your question is how to make velcro more sticky? Here are some tips to follow to keep them sticky for a long time.

  • When not in use, Velcro’s hook and loop fasteners should be closed. This will stop stray material like lint, hair, and other debris from becoming caught on the hooks.
  • Velcro is made to be adhesive and will quickly cling to objects. It will take up lint from things like blankets or clothing.
  • Velcro will gather up lint, hair, and anything else when you wash it. That is currently circling in the washer. To avoid this, keep the hook and loop fasteners closed while washing Velcro.
  • When feasible, wash Velcro-containing clothing separately from other things. Lint is abundant in washers and dryers and is drawn to Velcro. Velcro-containing clothing should air dry. As a result, Velcro doesn’t collect lint from other fabrics and garments.
  • Maintain the Velcro tabs tight if air drying isn’t an option. Also, dry the clothing in the dryer, away from other objects.

Following these measures will help you to prevent the deterioration of velcro’s adhesiveness. 

There are various types of velcro strips. I’ve compiled a list of excellent velcro strips. These are of good quality and at a reasonable price:

VELCRO Brand Heavy Duty Fasteners are within reasonable price. 

VELCRO Brand Extreme Outdoor Mounting Tape is of good quality.

I’m hoping the information I’ve provided will help you pick the right velcro strip! You can also check another issue article – receiver binding problems of spektrum receiver.

Frequently Asked Questions (FAQs)

How do you permanently attach Velcro to fabric?

Leave a seam allowance on both sides of the Velcro while using a liquid or hot glue. Apply glue gradually from the central point toward the edge while flipping the Velcro over. When once Velcro strip is pushed onto the cloth surface, keep in mind that liquid glue spreads. Avert the cloth from getting adhesive on it.

How do you use adhesive Velcro?

Use the rough hook side of the Velcro if you’re attaching it to clothing. It, therefore, faces away from your body. The strips may be used either way if not. To ensure that the Velcro strip stays in place, align it with the cloth and press down firmly.

Does Velcro work wet?

Yes, it does. Polyester Velcro is appropriate for uses where sunshine and moisture are concerns. It doesn’t deteriorate when exposed to too much sunshine. Additionally, water has little impact on the hook and loop fasteners’ gripping power.

Conclusion

Now you know the reasons and fixes behind your velcro adhesive not sticking. I genuinely hope you are able to repair your velcro adhesive sticking problem without any difficulty!

One of the strongest and longest-lasting methods for securing Velcro to clothing is still sewing. The sewn Velcro may be quickly taken off again.

Wishing you all the best!

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top